The stick can be moved upward, downward, to the left or to the right, and it can also be pressed to initiate operations. During recording and when the E-E mode is selected, it shows the levels of the input audio signals; during playback, it shows the levels of the output audio signals. It is recommended that tapes bearing the Panasonic brand be used as the consumer-use DV tapes. Setup menu No. Page Setup Menus Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use.
YA93P — 24 — Description When the STOP button is pressed, operation is transferred to the sub- screen, and the setup level is set for each output. Page Video Head Cleaning Video head cleaning This unit is equipped with an auto head cleaning function which automatically reduces the amount of dirt on the video heads. Page Error Messages Error messages When a warning occurs in this unit, the error number is indicated on the counter display. When a operational malfunction has occurred in the unit, the error number flashes on the counter display.
When multiple events occur, the event with the highest priority is displayed. Priority Display Error messages High Page 41 Error messages continued Priority Monitor display This appears when an envelope level approximately one-third of the normal level E has been detected for more than one LOW RF second during playback or recording.
Page 45 — 45 — This manual is also suitable for: Aj-sd93e Aj-sd93p. Open the fuse compartment with a screwdriver. Replace the fuse. Operating precaution Operation near any appliance which generates strong magnetic fields may give rise to noise in the video and audio signals.
Refer servicing to qualified service personnel. It comes with the following features. Up to 92 minutes of recording M cassettes max. Superior picture quality Superior picture quality is achieved through component signal recording at 2 times the recording rate of the DVCPRO format. Compatibility with general consumer video equipment DV cassette tapes containing material shot with a consumer digital camera or the like can be played back on this unit.
Digital slow motion Panasonic's original digital slow-motion technology makes it possible to obtain clear pictures even during slow playback at speeds ranging from ON: Recording on the cassette tape is disabled inhibited. OFF: Recording on the cassette tape is enabled so long as the accidental erasure prevention mechanism on the cassette tape is set to enable recording. FINE mode : The scale in 0. The position indicates the standard level of —20 dB —18 dB.
See page Headphone jack and volume control When stereo headphones are connected to the headphone jack, the sound can be monitored using the headphones during recording or playback. Audio level control selector switch UNITY: At this position, the audio signals are recorded or played back at a fixed level regardless of the position of the audio level control knobs. REC : At this position, the audio signals are recorded at the level which has been adjusted by the audio level control knobs.
PB : At this position, the audio signals are played back at the level which has been adjusted by the audio level control knobs. Note: It is not possible to set this switch so that both the recording level and playback level can be adjusted. Parts and their functions continued Front panel. OFF : No superimposed information is output. PLAY button When this button is pressed, playback starts.
When this button and the REC button are pressed together, recording starts. REW button When this button is pressed, the tape is rewound. FF button When this button is pressed, the tape is fast forwarded. WIDE lamp This lamp lights when wide-screen information is being recorded on a tape. Format displays The recording format and the format of the tape inserted in the unit are displayed here. In the standby OFF mode, this lamp is flashing. Repeat lamp This lights when the repeat play mode has been set.
Counter display The tape counter, time code, etc. Channel condition lamps These lamps light to indicate the error rate status. Parts and their functions continued Rear panel. Pin No. IEEE digital interface. Input a signal with color burst. Since the video or audio output signal may be Fan disrupted if the reference video signal is not input, it is recommended that this connector be used by the This fan is used to cool down the VTR.
It is not a safety ground. During recording, the time code Note: generated by the internal time code generator is output. The digital audio signals to be input must be Remote control connector option: AJ-YA93P synchronized with the video input signals. Otherwise, noise will be generated in the audio output signals. Analog composite video In this case, use it as a player.
Analog composite video signals are output The analog audio signals are output from these — 12 — connectors. The cassette tape will load automatically. Setup menu No. Setup menu Setup menu No. You can only view or download manuals with. Sign Up and get 5 for free. Upload your files to the site. You get 1 for each file you add. Get 1 for every time someone downloads your manual.
Buy as many as you need. View and download manuals available only for. Register and get 5 for free. Upload manuals that we do not have and get 1 for each file. Get 1 for every download of your manual. Buy as much as you need. Included accessories Optional boards Parts and their functions IEEE digital interface Repeat playback Setup initial settings Setup menus Superimpose screen Video head cleaning Error messages This enables signals to be input and output using the.
Use a 6-pin type of. Analog composite video signals are output from this. Video signals with information superimposed on them. To set the superimposing to ON or. This is the input connector for the reference video. Since the video or audio output signal may be. This fan is used to cool down the VTR. Use a signal where SCH does not fluctuate for the.
Connect one end of the power cord supplied to this. This is the loop-through output connector of the REF. This is connected to the signal ground terminal on the. This connector is used for recording the external time.
The playback time code is output from this connector. Integrated Telephone System Microwave Oven Personal Care Portable Radio Portable Stereo System Print Board Projection Television Projector Recording Equipment Remote Control Rice Cooker Security Camera Solar Panels 3.
Speakerphone TV Receiver TV Video Accessories Telephone Telephone Accessories Television Thermal Carafe 9. Toothbrush
0コメント